|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
New Product MBR(F,B)2090CT & MBR(F,B)20100CT Vishay General Semiconductor Dual Common-Cathode High-Voltage Schottky Rectifier TMBS(R) TO-220AB ITO-220AB FEATURES * Trench MOS Schottky technology * Lower power losses, high efficiency * Low forward voltage drop * High forward surge capability * High frequency operation MBR2090CT MBR20100CT PIN 1 PIN 3 PIN 2 CASE 2 1 3 MBRF2090CT MBRF20100CT PIN 1 PIN 3 PIN 2 1 2 3 * Meets MSL level 1, per J-STD-020, LF maximum peak of 245 C (for TO-263AB package) * Solder dip 260 C, 40 s (for TO-220AB and ITO-220AB package) * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TO-263AB K 2 1 MBRB2090CT MBRB20100CT PIN 1 PIN 2 K HEATSINK TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application. MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF TJ max. 10 A x 2 90 V, 100 V 150 A 0.65 V 150 C MAXIMUM RATINGS (TC = 25 C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage total device Maximum average forward rectified current at TC = 133 C per diode Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode Peak repetitive reverse current per diode at tp = 2 s, 1 kHz Voltage rate of change (rated VR) Operating junction and storage temperature range Isolation voltage (ITO-220AB only) From terminal to heatsink t = 1 min SYMBOL VRRM VRWM VDC IF(AV) IFSM IRRM dV/dt TJ, TSTG VAC MBR2090CT 90 90 90 20 10 150 0.5 10 000 - 65 to + 150 1500 MBR20100CT 100 100 100 UNIT V V V A A A V/s C V Document Number: 89033 Revision: 26-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product MBR(F,B)2090CT & MBR(F,B)20100CT Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage per diode (1) TEST CONDITIONS IF = 10 A IF = 10 A IF = 20 A TC = 25 C TC = 125 C TC = 125 C TJ = 25 C TJ = 100 C SYMBOL VALUE 0.80 0.65 0.75 100 6.0 UNIT VF V Maximum reverse current per diode at working peak reverse voltage (2) Notes: (1) Pulse test: 300 s pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms IR A mA THERMAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER Typical thermal resistance per diode SYMBOL RJA RJC MBR 60 2.0 MBRF 3.5 MBRB 60 2.0 UNIT C/W ORDERING INFORMATION (Example) PACKAGE TO-220AB ITO-220AB TO-263AB TO-263AB PREFERRED P/N MBR20100CT-E3/4W MBRF20100CT-E3/4W MBRB20100CT-E3/4W MBRB20100CT-E3/8W UNIT WEIGHT (g) 1.88 1.75 1.38 1.38 PACKAGE CODE 4W 4W 4W 8W BASE QUANTITY 50/tube 50/tube 50/tube 800/reel DELIVERY MODE Tube Tube Tube Tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 20 Resistive or Inductive Load MBRF 160 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 140 16 Peak Forward Surge Current (A) 150 Average Forward Current (A) MBR & MBRB 120 12 100 8 80 4 60 0 0 50 100 40 1 10 100 Case Temperature (C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 89033 Revision: 26-May-08 New Product MBR(F,B)2090CT & MBR(F,B)20100CT Vishay General Semiconductor 100 100 Transient Thermal Impedance (C/W) Instantaneous Forward Current (A) Junction to Case TJ = 150 C 10 TJ = 125 C 1 10 1 0.1 TJ = 25 C MBR(B) 0.1 0.01 0.1 1 10 100 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode 100 10 Transient Thermal Impedance (C/W) Instantaneous Reverse Current (mA) TJ = 150 C 10 TJ = 125 C 1 Junction to Case 1 0.1 0.1 0.01 MBRF 0.001 0.1 1 10 100 0.01 TJ = 25 C 0.001 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Per Diode Figure 7. Typical Transient Thermal Impedance Per Diode 10 000 TJ = 25 C f = 1 MHz Vsig = 50 mVp-p 1000 Junction Capacitance (pF) 100 10 1 10 100 Reverse Voltage (V) Figure 5. Typical Junction Capacitance Per Diode Document Number: 89033 Revision: 26-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 New Product MBR(F,B)2090CT & MBR(F,B)20100CT Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 3 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 1 2 3 0.191 (4.85) 0.171 (4.35) 0.057 (1.45) 0.045 (1.14) 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 45 Ref. 0.404 (10.26) 0.384 (9.75) 0.076 Ref. (1.93) Ref. 0.076 Ref. (1.93) Ref. ITO-220AB 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 7 Ref. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.671 (17.04) 0.651 (16.54) 0.135 (3.43) DIA. 0.122 (3.08) DIA. PIN 7 Ref. 0.350 (8.89) 0.330 (8.38) 7 Ref. 1 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) PIN 2 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.028 (0.71) 0.020 (0.51) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.055 (1.40) 0.047 (1.19) 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) 0.33 (8.38) MIN. 0.190 (4.83) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 89033 Revision: 26-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of MBR20100CT-E34W |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |